Metanorma IEC document attributes

Note

Below are listed document attributes that are unique to Metanorma's processing of IEC documents.

Generally, document attributes for ISO also apply: refer to Metanorma-ISO document attributes for a detailed listing of attributes it shares with IEC.

For common document attributes, see Document attributes reference in general Metanorma author's documentation. That page describes attributes that apply to all Metanorma flavors, not just IEC.

For an introduction to Metanorma AsciiDoc document attributes and how Metanorma uses them, see the corresponding topic.

Note

Document requirements stated in ISO/IEC Directives, Part 2:2018 (IEC version (PDF link), ISO version (HTML link)) apply equally to ISO and IEC deliverables.

Parts and subparts

:partnumber:: {part} or {part}-{subpart}

IEC documents can have both parts and subparts, unlike ISO documents which only supports parts.

Both {part} and {subpart} only accept numerals.

Document relations

Translated from

translated-from: document identifier that the current document is a translation of.

IEC documents can be translated by IEC-CO and tagged with the translated-from attribute. This is used to derive the correct status code.

See general Metanorma document attributes for more information.

Document type

:doctype:: type of document. The permitted types are as follows.
Note
Unlike ISO, IEC does not have international-workshop-agreement, and does have interpretation-sheet.

international-standard

International Standard

technical-specification

Technical Specification

technical-report

Technical Report

publicly-available-specification

Publicly Available Specification

guide

Guide

interpretation-sheet.

Interpretation Sheet

:function:

function of document [added in https://github.com/metanorma/metanorma-iec/releases/tag/v1.2.9]. Most documents do not have a category. The permitted types are as follows.

emc: EMC
safety: Safety
environment: Environment
quality-assurance: Quality assurance

:horizontal:

whether the document is a horizontal standard [added in https://github.com/metanorma/metanorma-iec/releases/tag/v1.2.9]. Allowed values below.

true: Horizontal standard
false: (default) Non-horizontal standard

Project stage and substage of document

General

The project stage and substage can be entered in two ways shown below.

Not all IEC codes are represented -- those that are not are set by the IEC-CO (IEC Central Office) rather than authors, or do not correspond to standards documents but to other parts of the process (compilation of comments, reports on votes, translation, etc.), are not represented here.

The following codes are ignored:

PCC, PRVC, PRVDISH, PRVD, PRVDPAS, PRVDTR, PRVDTS, PRVN
preDISH, prePNW, preCDPAS, preCD, preDTR
DECDISH, DECFDIS, DECPUB
TCDV, TDISH, TDTR, TDTS, TFDIS, TPUB
RPUB
DEL
MERGED, DREJ
ADISSB, APUBSB

Via ISO International Harmonized Stage Codes

:docstage:: project stage code of document
:docsubstage:: project substage code of document

The codes in the first entry form are drawn from the ISO International Harmonized Stage Codes.

The mapping to IEC stage codes is taken from ISO/IEC DIR 1:2019 + IEC SUP:2019, Annex SH, updated against the current discussion of stage codes in IEC Processes & Procedures -- Stage Codes and IEC Processes & Procedures -- Workflow.

The following codes are supported:

ISO Stage	ISO Substage	IEC code	Definition	Document Types
00	00	PWI	Preliminary work item	IS, TS, TR
10	00	PNW	New work item proposal	IS, TS
20	00	ANW	Registration of new project
20	98	CAN	Draft cancelled	IS, TS, TR, PAS, ISH
20	99	ACD	Approved for CD	IS, TS, TR
30	20	CD	Draft circulated as CD	IS, TS, TR
30	92	BWG	Return to drafting phase or redefine project
30	99	A2CD	Register for next applicable phase
35	20	2CD ... 9CD	Circulation for comment
35	91	CDM	CD to be discussed at meeting	IS, TS, TR
35	92	A3CD ... A9CD	Return to drafting phase
35	99	ACDV	Approved for CDV	IS, TS, TR
40	20	CCDV	Draft circulated as CDV	IS
40	91	CDVM	Rejected CDV to be discussed at a meeting	IS
40	92	NCDV	CDV rejected	IS
40	93	NADIS	Repeat enquiry
40	99	ADIS	Register for next applicable phase
40	99	ADTR	Approved for DTR	TR
40	99	ADTS	Approved for DTS	TS
50	00	RDISH	DISH received and registered	ISH
50	00	RFDIS	Registration for formal approval
50	20	CDISH	Draft circulated as DISH	ISH
50	20	CDPAS	Draft circulated as DPAS	PAS
50	20	CDTR	Draft circulated as DTR	TR
50	20	CDTS	Draft circulated as DTS	TS
50	20	CFDIS	Circulation for formal approval	IS
50	92	DTRM	Rejected DTR to be discussed at meeting	TR
50	92	DTSM	Rejected DTS to be discussed at meeting	TS
50	92	NDTR	DTR rejected	TR: Displayed as DTRM
50	92	NDTS	DTS rejected	TS: Displayed as DTSM
50	92	NFDIS	Return to drafting phase
50	99	APUB	Approved for publication	IS, TS, TR, PAS, ISH
60	00	BPUB	Being published	IS, TS, TR, PAS, ISH
60	60	PPUB	Publication issued	IS, TS, TR, PAS, ISH
90	92	RR	Review report
92	20	AMW	Document under revision
95	99	WPUB	Publication withdrawn	IS, TS, TR, PAS, ISH
99	60	DELPUB	Deleted publication	IS, TS, TR, PAS, ISH

Via project stage abbreviation

:stage: project stage abbreviation

An IEC project stage abbreviation code entered under :stage: will be recognised, and broken down into the corresponding ISO harmonized stage and substage codes shown in the table automatically.

For example, :stage: ACD is equivalent to setting :docstage: 20 and :docsubstage: 99.

In the case of A2CD... A9CD and 2CD... 9CD, the numeral value of the :iteration: attribute will also be set accordingly.

For example, :stage: 8CD is equivalent to setting :docstage: 35, :docsubstage: 20 and :iteration: 8.

Cover page attributes

:accessibility-color-inside:: indication that document contains colour content (default: false) [added in https://github.com/metanorma/metanorma-iec/releases/tag/v1.2.10]
:price-code:: price code group of publication, as documented in the IEC Data Feeds: Technical documentation document [added in https://github.com/metanorma/metanorma-iec/releases/tag/v1.2.10]
:cen-processing:: CEN (European Committee for Standardization) processing (default: false) [added in https://github.com/metanorma/metanorma-iec/releases/tag/v1.2.11]
:secretary:: Secretary of the secretariat [added in https://github.com/metanorma/metanorma-iec/releases/tag/v1.2.12].
:interest-to-committees:: Draft is of interest to the following committees [added in https://github.com/metanorma/metanorma-iec/releases/tag/v1.2.12].